dotfiles/.config/i3pystatus/config.py

95 lines
2.4 KiB
Python
Raw Blame History

This file contains ambiguous Unicode characters

This file contains Unicode characters that might be confused with other characters. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

from i3pystatus import Status
import sensors
status = Status()
status.register("pulseaudio",
format="♪I {volume}%",
format_muted="♪I -∞dB",
step="2",
sink="alsa_output.pci-0000_00_1f.3.analog-stereo")
status.register("pulseaudio",
format="♪D {volume}%",
format_muted="♪D -∞dB",
step="2",
sink="@DEFAULT_SINK@")
status.register("backlight",
format="{percentage}%",
backlight="intel_backlight",
on_leftclick="xbacklight =10",
on_rightclick="xbacklight =50",
interval=1)
status.register("shell",
format="L: {output}",
command="/home/kunsi/.config/i3pystatus/screensaver-status.sh",
interval=1,
on_leftclick="xset s 90 10",
on_rightclick="xset s off")
status.register("clock",
format="%a, %Y-%m-%d %H:%M:%S UTC",)
status.register("battery",
battery_ident="BAT0",
format="B0: {status}{percentage:.2f}% {remaining:%E%h:%M}",
alert=True,
alert_percentage=5,
status={
"DIS": "",
"CHR": "",
"FULL": "",
})
status.register("battery",
battery_ident="BAT1",
format="B1: {status}{percentage:.2f}% {remaining:%E%h:%M}",
alert=True,
alert_percentage=5,
status={
"DIS": "",
"CHR": "",
"FULL": "",
})
status.register("load",
format="{avg1}")
status.register("temp",
format="{temp:.0f}°C",
hints={"markup": "pango"},
# lm_sensors_enable=True,
dynamic_color=True)
status.register("shell",
format="{output}",
hints = {"markup": "pango"},
command="/home/kunsi/.config/i3pystatus/rfkill-wifi.py",
interval=1)
status.register("shell",
format="{output}",
hints = {"markup": "pango"},
command="/home/kunsi/.config/i3pystatus/rfkill-bt.py",
interval=1)
status.register("shell",
format="{output}",
hints = {"markup": "pango"},
command="/home/kunsi/.config/i3pystatus/touchscreen.sh",
interval=1,
on_leftclick="xinput enable 'ELAN Touchscreen'",
on_rightclick="xinput disable 'ELAN Touchscreen'")
status.register("network",
interface="wlp4s0",
format_up="{interface}:[ {essid} ({freq:01.3f}GHz {quality}%)][ {v6cidr}][ {v4cidr}] \[D/U {bytes_recv}/{bytes_sent} KiB/s\]",
format_down="{interface}: down",
detect_active=True,
freq_divisor=1000000000,
divisor=1024,
hints={"markup":"pango"})
status.register("disk",
path="/home",
format="{used}/{total}G",)
status.run()