commit c6e59951f08605cde892ef5f7d6a30b1e408cf43 Author: Franziska Kunsmann Date: Sat Nov 6 08:15:25 2021 +0100 add tastaturworkshop_c3kl_split_TKL_dual_arrows diff --git a/tastaturworkshop_c3kl_split_TKL_dual_arrows/README.md b/tastaturworkshop_c3kl_split_TKL_dual_arrows/README.md new file mode 100644 index 0000000..6532c86 --- /dev/null +++ b/tastaturworkshop_c3kl_split_TKL_dual_arrows/README.md @@ -0,0 +1,21 @@ +# Split TKL keyboard (QWERTZ), with an additional arrow key set on the left + +*Built at the Keyboard Workshop by Chaos inKL in late 2021* + +Make example for this keyboard (after setting up your build environment): + + make franzi_split_60pct:default + +Flashing example for this keyboard: + + make franzi_split_60pct:default:flash + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). + +## Bootloader + +Enter the bootloader in 3 ways: + +* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard +* **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead +* **Keycode in layout**: Press the key mapped to `RESET` if it is available diff --git a/tastaturworkshop_c3kl_split_TKL_dual_arrows/keyboard-layout-editor.json b/tastaturworkshop_c3kl_split_TKL_dual_arrows/keyboard-layout-editor.json new file mode 100644 index 0000000..a27088e --- /dev/null +++ b/tastaturworkshop_c3kl_split_TKL_dual_arrows/keyboard-layout-editor.json @@ -0,0 +1,190 @@ +[ + [ + { + "a": 7 + }, + "", + "", + "", + { + "x": 0.25, + "a": 4 + }, + "Esc", + "!\n1", + "\"\n2", + "£\n3", + "$\n4", + "%\n5", + "^\n6", + { + "x": 3.5 + }, + "&\n7", + "*\n8", + "(\n9", + ")\n0", + "_\n-", + "+\n=", + { + "w": 2 + }, + "Backspace", + { + "x": 0.25 + }, + "Insert", + "Home", + "PgUp" + ], + [ + { + "a": 7 + }, + "", + "", + "", + { + "x": 0.25, + "a": 4, + "w": 1.5 + }, + "Tab", + "Q", + "W", + "E", + "R", + "T", + { + "x": 3.5 + }, + "Y", + "U", + "I", + "O", + "P", + "{\n[", + "}\n]", + { + "x": 0.25, + "w": 1.25, + "h": 2, + "w2": 1.5, + "h2": 1, + "x2": -0.25 + }, + "Enter", + { + "x": 0.25 + }, + "Delete", + "End", + "PgDn" + ], + [ + { + "x": 3.25, + "w": 1.75 + }, + "Caps Lock", + "A", + "S", + "D", + "F", + "G", + { + "x": 3.5 + }, + "H", + "J", + "K", + "L", + ":\n;", + "@\n'", + "~\n#" + ], + [ + { + "x": 1 + }, + "↑", + { + "x": 1.25, + "w": 1.25 + }, + "Shift", + "|\n\\", + "Z", + "X", + "C", + "V", + "B", + { + "x": 3.5 + }, + "N", + "M", + "<\n,", + ">\n.", + "?\n/", + { + "w": 2.75 + }, + "Shift", + { + "x": 1.25 + }, + "↑" + ], + [ + "←", + "↓", + "→", + { + "x": 0.25, + "w": 1.25 + }, + "Ctrl", + { + "w": 1.25 + }, + "Win", + { + "w": 1.25 + }, + "Alt", + { + "a": 7, + "w": 3 + }, + "", + { + "x": 3.75, + "w": 3 + }, + "", + { + "a": 4, + "w": 1.25 + }, + "AltGr", + { + "w": 1.25 + }, + "Win", + { + "w": 1.25 + }, + "Menu", + { + "w": 1.25 + }, + "Ctrl", + { + "x": 0.25 + }, + "←", + "↓", + "→" + ] +] \ No newline at end of file diff --git a/tastaturworkshop_c3kl_split_TKL_dual_arrows/qmk/config.h b/tastaturworkshop_c3kl_split_TKL_dual_arrows/qmk/config.h new file mode 100644 index 0000000..48fe513 --- /dev/null +++ b/tastaturworkshop_c3kl_split_TKL_dual_arrows/qmk/config.h @@ -0,0 +1,143 @@ +// Copyright 2021 Franziska (@kunsi) +// SPDX-License-Identifier: GPL-2.0-or-later + +#pragma once + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0xFEED +#define PRODUCT_ID 0x0000 +#define DEVICE_VER 0x0001 +#define MANUFACTURER kunsi +#define PRODUCT franzi_split_60pct + +/* key matrix size */ +#define MATRIX_ROWS 10 +#define MATRIX_COLS 11 + +/* + * Keyboard Matrix Assignments + * + * Change this to how you wired your keyboard + * COLS: AVR pins used for columns, left to right + * ROWS: AVR pins used for rows, top to bottom + * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) + * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) + * + */ +#define MATRIX_COL_PINS { F5, F4, F1, F0, B0, B1, B2, B3, B7, D2, D3 } +#define MATRIX_COL_PINS_RIGHT { F5, F4, F1, F0, B0, B1, B2, B3, B7, D2, D3 } +#define MATRIX_ROW_PINS { B4, B5, B6, F7, F6 } +#define MATRIX_ROW_PINS_RIGHT { B4, B5, B6, F7, F6 } +#define UNUSED_PINS + +/* COL2ROW, ROW2COL */ +#define DIODE_DIRECTION COL2ROW + +#define USE_I2C +#define SPLIT_USB_DETECT + +/* + * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN. + */ +//#define SOFT_SERIAL_PIN D0 // or D1, D2, D3, E6 + +//#define LED_NUM_LOCK_PIN B0 +//#define LED_CAPS_LOCK_PIN B1 +//#define LED_SCROLL_LOCK_PIN B2 +//#define LED_COMPOSE_PIN B3 +//#define LED_KANA_PIN B4 + +//#define BACKLIGHT_PIN B7 +//#define BACKLIGHT_LEVELS 3 +//#define BACKLIGHT_BREATHING + +//#define RGB_DI_PIN E2 +//#ifdef RGB_DI_PIN +//# define RGBLED_NUM 16 +//# define RGBLIGHT_HUE_STEP 8 +//# define RGBLIGHT_SAT_STEP 8 +//# define RGBLIGHT_VAL_STEP 8 +//# define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */ +//# define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ +/*== all animations enable ==*/ +//# define RGBLIGHT_ANIMATIONS +/*== or choose animations ==*/ +//# define RGBLIGHT_EFFECT_BREATHING +//# define RGBLIGHT_EFFECT_RAINBOW_MOOD +//# define RGBLIGHT_EFFECT_RAINBOW_SWIRL +//# define RGBLIGHT_EFFECT_SNAKE +//# define RGBLIGHT_EFFECT_KNIGHT +//# define RGBLIGHT_EFFECT_CHRISTMAS +//# define RGBLIGHT_EFFECT_STATIC_GRADIENT +//# define RGBLIGHT_EFFECT_RGB_TEST +//# define RGBLIGHT_EFFECT_ALTERNATING +/*== customize breathing effect ==*/ +/*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/ +//# define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64 +/*==== use exp() and sin() ====*/ +//# define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7 +//# define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255 +//#endif + +/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ +#define DEBOUNCE 5 + +/* define if matrix has ghost (lacks anti-ghosting diodes) */ +//#define MATRIX_HAS_GHOST + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE + +/* If defined, GRAVE_ESC will always act as ESC when CTRL is held. + * This is useful for the Windows task manager shortcut (ctrl+shift+esc). + */ +//#define GRAVE_ESC_CTRL_OVERRIDE + +/* + * Force NKRO + * + * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved + * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the + * makefile for this to work.) + * + * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) + * until the next keyboard reset. + * + * NKRO may prevent your keystrokes from being detected in the BIOS, but it is + * fully operational during normal computer usage. + * + * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) + * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by + * bootmagic, NKRO mode will always be enabled until it is toggled again during a + * power-up. + * + */ +//#define FORCE_NKRO + +/* + * Feature disable options + * These options are also useful to firmware size reduction. + */ + +/* disable debug print */ +//#define NO_DEBUG + +/* disable print */ +//#define NO_PRINT + +/* disable action features */ +//#define NO_ACTION_LAYER +//#define NO_ACTION_TAPPING +//#define NO_ACTION_ONESHOT + +/* disable these deprecated features by default */ +#define NO_ACTION_MACRO +#define NO_ACTION_FUNCTION + +/* Bootmagic Lite key configuration */ +//#define BOOTMAGIC_LITE_ROW 0 +//#define BOOTMAGIC_LITE_COLUMN 0 diff --git a/tastaturworkshop_c3kl_split_TKL_dual_arrows/qmk/franzi_split_60pct.c b/tastaturworkshop_c3kl_split_TKL_dual_arrows/qmk/franzi_split_60pct.c new file mode 100644 index 0000000..21fb910 --- /dev/null +++ b/tastaturworkshop_c3kl_split_TKL_dual_arrows/qmk/franzi_split_60pct.c @@ -0,0 +1,4 @@ +// Copyright 2021 Franziska (@kunsi) +// SPDX-License-Identifier: GPL-2.0-or-later + +#include "franzi_split_60pct.h" diff --git a/tastaturworkshop_c3kl_split_TKL_dual_arrows/qmk/franzi_split_60pct.h b/tastaturworkshop_c3kl_split_TKL_dual_arrows/qmk/franzi_split_60pct.h new file mode 100644 index 0000000..abdd75b --- /dev/null +++ b/tastaturworkshop_c3kl_split_TKL_dual_arrows/qmk/franzi_split_60pct.h @@ -0,0 +1,34 @@ +// Copyright 2021 Franziska (@kunsi) +// SPDX-License-Identifier: GPL-2.0-or-later + +#pragma once + +#include "quantum.h" + +/* This is a shortcut to help you visually see your layout. + * + * The first section contains all of the arguments representing the physical + * layout of the board and position of the keys. + * + * The second converts the arguments into a two-dimensional array which + * represents the switch matrix. + */ +#define LAYOUT( \ + a01, b01, c01, d01, e01, f01, g01, h01, j01, k01, m01, n01, o01, p01, q01, r01, s01, t01, u01, v01, \ + a02, b02, c02, d02, e02, f02, g02, h02, j02, l02, m02, n02, o02, p02, q02, r02, s02, t02, u02, v02, \ + d03, e03, f03, g03, h03, j03, l03, m03, n03, o03, p03, q03, r03, \ + b04, d04, e04, f04, g04, h04, j04, k04, m04, n04, o04, p04, q04, s04, u04, \ + a05, b05, c05, d05, e05, f05, h05, n05, p05, q05, r05, s05, t05, u05, v05 \ +) { \ + { a01, b01, c01, d01, e01, f01, g01, h01, j01, k01, KC_NO }, \ + { a02, b02, c02, d02, e02, f02, g02, h02, j02, KC_NO, KC_NO }, \ + { KC_NO, KC_NO, KC_NO, d03, e03, f03, g03, h03, j03, KC_NO, KC_NO }, \ + { KC_NO, b04, KC_NO, d04, e04, f04, g04, h04, j04, k04, KC_NO }, \ + { a05, b05, c05, d05, e05, f05, KC_NO, h05, KC_NO, KC_NO, KC_NO }, \ + \ + { KC_NO, m01, n01, o01, p01, q01, r01, s01, t01, u01, v01 }, \ + { l02, m02, n02, o02, p02, q02, r02, s02, t02, u02, v02 }, \ + { l03, m03, n03, o03, p03, q03, r03, KC_NO, KC_NO, KC_NO, KC_NO }, \ + { KC_NO, m04, n04, o04, p04, q04, KC_NO, s04, KC_NO, u04, KC_NO }, \ + { KC_NO, KC_NO, n05, KC_NO, p05, q05, r05, s05, t05, u05, v05 } \ +} diff --git a/tastaturworkshop_c3kl_split_TKL_dual_arrows/qmk/keymaps/default/keymap.c b/tastaturworkshop_c3kl_split_TKL_dual_arrows/qmk/keymaps/default/keymap.c new file mode 100644 index 0000000..4d4580b --- /dev/null +++ b/tastaturworkshop_c3kl_split_TKL_dual_arrows/qmk/keymaps/default/keymap.c @@ -0,0 +1,28 @@ +// Copyright 2021 Franziska (@kunsi) +// SPDX-License-Identifier: GPL-2.0-or-later + +#include QMK_KEYBOARD_H + +// Defines names for use in layer keycodes and the keymap +enum layer_names { + _BASE, + _FN +}; + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + /* Base */ + [_BASE] = LAYOUT( + KC_VOLU, KC_NO, KC_VOLD, KC_ESCAPE, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_NO, KC_NO, KC_BSPACE, KC_INSERT, KC_HOME, KC_PGUP, + KC_MPRV, KC_MPLY, KC_MNXT, KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_NO, KC_NO, KC_ENTER, KC_DELETE, KC_END, KC_PGDOWN, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_NO, KC_NO, KC_NO, + KC_UP, KC_LSHIFT, KC_NO, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_NO, KC_NO, KC_NO, KC_RSHIFT, KC_UP, + KC_LEFT, KC_DOWN, KC_RIGHT, KC_LCTRL, KC_LGUI, KC_LALT, KC_SPACE, KC_SPACE, KC_RALT, KC_RGUI, MO(_FN), KC_RCTRL, KC_LEFT, KC_DOWN, KC_RIGHT + ), + [_FN] = LAYOUT( + KC_NO, RESET, KC_NO, KC_ESCAPE, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_NO, KC_NO, KC_NO, KC_NO, + KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, + KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, + KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, + KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_TRNS, KC_NO, KC_NO, KC_NO, KC_RIGHT + ) +}; diff --git a/tastaturworkshop_c3kl_split_TKL_dual_arrows/qmk/keymaps/default/readme.md b/tastaturworkshop_c3kl_split_TKL_dual_arrows/qmk/keymaps/default/readme.md new file mode 100644 index 0000000..ef3cb3a --- /dev/null +++ b/tastaturworkshop_c3kl_split_TKL_dual_arrows/qmk/keymaps/default/readme.md @@ -0,0 +1 @@ +# The default keymap for franzi_split_60pct diff --git a/tastaturworkshop_c3kl_split_TKL_dual_arrows/qmk/rules.mk b/tastaturworkshop_c3kl_split_TKL_dual_arrows/qmk/rules.mk new file mode 100644 index 0000000..2fb6770 --- /dev/null +++ b/tastaturworkshop_c3kl_split_TKL_dual_arrows/qmk/rules.mk @@ -0,0 +1,23 @@ +# MCU name +MCU = atmega32u4 + +# Bootloader selection +BOOTLOADER = atmel-dfu + +SPLIT_KEYBOARD = yes + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite +MOUSEKEY_ENABLE = yes # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = no # Console for debug +COMMAND_ENABLE = no # Commands for debug and configuration +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend +# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE = no # USB Nkey Rollover +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow +AUDIO_ENABLE = no # Audio output