Browse Source

Initial commit

master
Felix Kunsmann 4 years ago
commit
5472bf4654
  1. 58
      README.md
  2. BIN
      gerber/.DS_Store
  3. 5561
      gerber/Breakout RasPi 3D-Drucker-B.Cu.gbr
  4. 174
      gerber/Breakout RasPi 3D-Drucker-B.Mask.gbr
  5. 203
      gerber/Breakout RasPi 3D-Drucker-B.SilkS.gbr
  6. 72
      gerber/Breakout RasPi 3D-Drucker-Edge.Cuts.gbr
  7. 4961
      gerber/Breakout RasPi 3D-Drucker-F.Cu.gbr
  8. 174
      gerber/Breakout RasPi 3D-Drucker-F.Mask.gbr
  9. 1938
      gerber/Breakout RasPi 3D-Drucker-F.SilkS.gbr
  10. 1251
      gerber/Breakout RasPi 3D-Drucker-NPTH-drl_map.ps
  11. 20
      gerber/Breakout RasPi 3D-Drucker-NPTH.drl
  12. 3925
      gerber/Breakout RasPi 3D-Drucker-drl_map.ps
  13. 140
      gerber/Breakout RasPi 3D-Drucker.drl
  14. BIN
      img/top.jpg
  15. 77
      kicad/Breakout RasPi 3D-Drucker
  16. 1358
      kicad/Breakout RasPi 3D-Drucker old.kicad_pcb
  17. 371
      kicad/Breakout RasPi 3D-Drucker-cache.lib
  18. 738
      kicad/Breakout RasPi 3D-Drucker.bak
  19. 2137
      kicad/Breakout RasPi 3D-Drucker.kicad_pcb
  20. 2128
      kicad/Breakout RasPi 3D-Drucker.kicad_pcb-bak
  21. 459
      kicad/Breakout RasPi 3D-Drucker.net
  22. BIN
      kicad/Breakout RasPi 3D-Drucker.pdf
  23. 71
      kicad/Breakout RasPi 3D-Drucker.pro
  24. 738
      kicad/Breakout RasPi 3D-Drucker.sch
  25. 405
      kicad/Breakout RasPi 3D-Drucker.xml

58
README.md

@ -0,0 +1,58 @@
# RPi-ATX-LCD-Breakout
This board allows you to connect an ATX power supply and a HD44780-comptible LCD
screen to your Raspberry Pi (or others with compatible GPIO layout).
While it does have a 40pin GPIO connector, it will also work with older
26-pin variants of the Pi.
The board was created to provide a convenient interface for two
[Octoprint](http://octoprint.org/) plugins: PSUControl and LCD-HD44780 (See
links on bottom of this page).
![Board](img/top.jpg?raw=true)
The board itself offers a variety of features:
* Powering the Pi using +5VSB (standby power)
* Switching the PSU on and off using GPIO Pin 12
The GPIO pin can be connected to PS_ON directly, or via a transistor. This is
choosable using the three-pin jumper switch.
Alternatively, the PSU can be forced to be on, by using the 2-pin PS_ON
jumper.
* Connecting a character LCD to the Pi
LCD is wired as follows:
<dl>
<dt>Register Select</dt>
<dd>15</dd>
<dt>Enable</dt>
<dd>16</dd>
<dt>Data 4</dt>
<dd>21</dd>
<dt>Data 5</dt>
<dd>22</dd>
<dt>Data 6</dt>
<dd>23</dd>
<dt>Data 7</dt>
<dd>24</dd>
</dl>
Data 0-3 pins are not connected. Read/Write select has been wired to GND, so
it's not possible to read data from the LCD screen. Contrast pin is
connected to a potentiometer.
* Allow connecting of two fans, one 5V, one 12V
* Providing screw terminals for GND, +12V, +5VSB and +5V
* Providing a USB outlet powered by +5VSB
Note: All pin numbers use BOARD numbering.
## Links
* [OctoPrint-PSUControl](https://github.com/kantlivelong/OctoPrint-PSUControl) by kantlivelong
* [Octoprint-LCD-HD44780](https://github.com/Kunsi/Octoprint-LCD-HD44780) by Kunsi

BIN
gerber/.DS_Store

Binary file not shown.

5561
gerber/Breakout RasPi 3D-Drucker-B.Cu.gbr

File diff suppressed because it is too large

174
gerber/Breakout RasPi 3D-Drucker-B.Mask.gbr

@ -0,0 +1,174 @@
G04 #@! TF.FileFunction,Soldermask,Bot*
%FSLAX46Y46*%
G04 Gerber Fmt 4.6, Leading zero omitted, Abs format (unit mm)*
G04 Created by KiCad (PCBNEW 4.0.5) date 2017 April 15, Saturday 18:49:04*
%MOMM*%
%LPD*%
G01*
G04 APERTURE LIST*
%ADD10C,0.100000*%
%ADD11C,6.200000*%
%ADD12R,1.727200X2.032000*%
%ADD13O,1.727200X2.032000*%
%ADD14C,1.727200*%
%ADD15O,1.727200X1.727200*%
%ADD16R,1.727200X1.727200*%
%ADD17O,0.899160X1.501140*%
%ADD18C,1.998980*%
%ADD19C,2.499360*%
%ADD20C,7.000240*%
%ADD21R,2.032000X2.032000*%
%ADD22O,2.032000X2.032000*%
%ADD23C,2.000000*%
%ADD24C,2.500000*%
%ADD25R,2.500000X2.500000*%
%ADD26R,2.000000X2.600000*%
%ADD27O,2.000000X2.600000*%
%ADD28C,1.501140*%
%ADD29C,2.999740*%
G04 APERTURE END LIST*
D10*
D11*
X132532000Y-47688000D03*
X190532000Y-47688000D03*
X190532000Y-96688000D03*
X132532000Y-96688000D03*
D12*
X165100000Y-63500000D03*
D13*
X162560000Y-63500000D03*
X160020000Y-63500000D03*
D14*
X137414000Y-49022000D03*
D15*
X137414000Y-46482000D03*
D14*
X139954000Y-49022000D03*
D15*
X139954000Y-46482000D03*
X142494000Y-49022000D03*
X142494000Y-46482000D03*
X145034000Y-49022000D03*
X145034000Y-46482000D03*
X147574000Y-49022000D03*
X147574000Y-46482000D03*
X150114000Y-49022000D03*
X150114000Y-46482000D03*
X152654000Y-49022000D03*
X152654000Y-46482000D03*
X155194000Y-49022000D03*
X155194000Y-46482000D03*
X157734000Y-49022000D03*
X157734000Y-46482000D03*
X160274000Y-49022000D03*
X160274000Y-46482000D03*
X162814000Y-49022000D03*
X162814000Y-46482000D03*
X165354000Y-49022000D03*
X165354000Y-46482000D03*
X167894000Y-49022000D03*
X167894000Y-46482000D03*
X170434000Y-49022000D03*
X170434000Y-46482000D03*
X172974000Y-49022000D03*
X172974000Y-46482000D03*
X175514000Y-49022000D03*
X175514000Y-46482000D03*
X178054000Y-49022000D03*
X178054000Y-46482000D03*
X180594000Y-49022000D03*
X180594000Y-46482000D03*
X183134000Y-49022000D03*
X183134000Y-46482000D03*
X185674000Y-49022000D03*
X185674000Y-46482000D03*
D16*
X143764000Y-57404000D03*
D15*
X143764000Y-54864000D03*
X146304000Y-57404000D03*
X146304000Y-54864000D03*
X148844000Y-57404000D03*
X148844000Y-54864000D03*
X151384000Y-57404000D03*
X151384000Y-54864000D03*
X153924000Y-57404000D03*
X153924000Y-54864000D03*
X156464000Y-57404000D03*
X156464000Y-54864000D03*
X159004000Y-57404000D03*
X159004000Y-54864000D03*
X161544000Y-57404000D03*
X161544000Y-54864000D03*
D17*
X142748000Y-64770000D03*
X141478000Y-64770000D03*
X144018000Y-64770000D03*
D18*
X169418000Y-54610000D03*
X169418000Y-62230000D03*
X147574000Y-64770000D03*
X155194000Y-64770000D03*
X172720000Y-54610000D03*
X172720000Y-62230000D03*
D19*
X177744120Y-59611260D03*
X190246000Y-54610000D03*
X190246000Y-64612520D03*
D20*
X182745380Y-59611260D03*
D21*
X165100000Y-67056000D03*
D22*
X162560000Y-67056000D03*
D23*
X140000000Y-88000000D03*
X135000000Y-88000000D03*
X150000000Y-88000000D03*
X145000000Y-88000000D03*
D24*
X138244000Y-77186000D03*
X142444000Y-77186000D03*
X146644000Y-77186000D03*
X150844000Y-77186000D03*
X155044000Y-77186000D03*
X159244000Y-77186000D03*
X163444000Y-77186000D03*
X167644000Y-77186000D03*
X171844000Y-77186000D03*
X176044000Y-77186000D03*
X180244000Y-77186000D03*
X184444000Y-77186000D03*
D25*
X138244000Y-71386000D03*
D24*
X142444000Y-71386000D03*
X146644000Y-71386000D03*
X150844000Y-71386000D03*
X155044000Y-71386000D03*
X159244000Y-71386000D03*
X163444000Y-71386000D03*
X167644000Y-71386000D03*
X171844000Y-71386000D03*
X176044000Y-71386000D03*
X180244000Y-71386000D03*
X184444000Y-71386000D03*
D26*
X177292000Y-86614000D03*
D27*
X179832000Y-86614000D03*
X182372000Y-86614000D03*
D26*
X186436000Y-86614000D03*
D27*
X188976000Y-86614000D03*
X191516000Y-86614000D03*
D28*
X166878860Y-87119880D03*
X164338860Y-87119880D03*
X162306860Y-87119880D03*
X159766860Y-87119880D03*
D29*
X169926860Y-89786880D03*
X156210860Y-89786880D03*
M02*

203
gerber/Breakout RasPi 3D-Drucker-B.SilkS.gbr

@ -0,0 +1,203 @@
G04 #@! TF.FileFunction,Legend,Bot*
%FSLAX46Y46*%
G04 Gerber Fmt 4.6, Leading zero omitted, Abs format (unit mm)*
G04 Created by KiCad (PCBNEW 4.0.5) date 2017 April 15, Saturday 18:49:04*
%MOMM*%
%LPD*%
G01*
G04 APERTURE LIST*
%ADD10C,0.100000*%
%ADD11C,0.150000*%
G04 APERTURE END LIST*
D10*
X176257998Y-51878667D02*
X176491332Y-51545333D01*
X176657998Y-51878667D02*
X176657998Y-51178667D01*
X176391332Y-51178667D01*
X176324665Y-51212000D01*
X176291332Y-51245333D01*
X176257998Y-51312000D01*
X176257998Y-51412000D01*
X176291332Y-51478667D01*
X176324665Y-51512000D01*
X176391332Y-51545333D01*
X176657998Y-51545333D01*
X175657998Y-51878667D02*
X175657998Y-51512000D01*
X175691332Y-51445333D01*
X175757998Y-51412000D01*
X175891332Y-51412000D01*
X175957998Y-51445333D01*
X175657998Y-51845333D02*
X175724665Y-51878667D01*
X175891332Y-51878667D01*
X175957998Y-51845333D01*
X175991332Y-51778667D01*
X175991332Y-51712000D01*
X175957998Y-51645333D01*
X175891332Y-51612000D01*
X175724665Y-51612000D01*
X175657998Y-51578667D01*
X175357999Y-51845333D02*
X175291332Y-51878667D01*
X175157999Y-51878667D01*
X175091332Y-51845333D01*
X175057999Y-51778667D01*
X175057999Y-51745333D01*
X175091332Y-51678667D01*
X175157999Y-51645333D01*
X175257999Y-51645333D01*
X175324665Y-51612000D01*
X175357999Y-51545333D01*
X175357999Y-51512000D01*
X175324665Y-51445333D01*
X175257999Y-51412000D01*
X175157999Y-51412000D01*
X175091332Y-51445333D01*
X174757998Y-51412000D02*
X174757998Y-52112000D01*
X174757998Y-51445333D02*
X174691332Y-51412000D01*
X174557998Y-51412000D01*
X174491332Y-51445333D01*
X174457998Y-51478667D01*
X174424665Y-51545333D01*
X174424665Y-51745333D01*
X174457998Y-51812000D01*
X174491332Y-51845333D01*
X174557998Y-51878667D01*
X174691332Y-51878667D01*
X174757998Y-51845333D01*
X174124665Y-51878667D02*
X174124665Y-51178667D01*
X174124665Y-51445333D02*
X174057999Y-51412000D01*
X173924665Y-51412000D01*
X173857999Y-51445333D01*
X173824665Y-51478667D01*
X173791332Y-51545333D01*
X173791332Y-51745333D01*
X173824665Y-51812000D01*
X173857999Y-51845333D01*
X173924665Y-51878667D01*
X174057999Y-51878667D01*
X174124665Y-51845333D01*
X173224666Y-51845333D02*
X173291332Y-51878667D01*
X173424666Y-51878667D01*
X173491332Y-51845333D01*
X173524666Y-51778667D01*
X173524666Y-51512000D01*
X173491332Y-51445333D01*
X173424666Y-51412000D01*
X173291332Y-51412000D01*
X173224666Y-51445333D01*
X173191332Y-51512000D01*
X173191332Y-51578667D01*
X173524666Y-51645333D01*
X172891332Y-51878667D02*
X172891332Y-51412000D01*
X172891332Y-51545333D02*
X172857999Y-51478667D01*
X172824666Y-51445333D01*
X172757999Y-51412000D01*
X172691332Y-51412000D01*
X172457999Y-51878667D02*
X172457999Y-51412000D01*
X172457999Y-51545333D02*
X172424666Y-51478667D01*
X172391333Y-51445333D01*
X172324666Y-51412000D01*
X172257999Y-51412000D01*
X172091333Y-51412000D02*
X171924666Y-51878667D01*
X171758000Y-51412000D02*
X171924666Y-51878667D01*
X171991333Y-52045333D01*
X172024666Y-52078667D01*
X172091333Y-52112000D01*
X170958000Y-51878667D02*
X170958000Y-51178667D01*
X170691334Y-51178667D01*
X170624667Y-51212000D01*
X170591334Y-51245333D01*
X170558000Y-51312000D01*
X170558000Y-51412000D01*
X170591334Y-51478667D01*
X170624667Y-51512000D01*
X170691334Y-51545333D01*
X170958000Y-51545333D01*
X170258000Y-51878667D02*
X170258000Y-51412000D01*
X170258000Y-51178667D02*
X170291334Y-51212000D01*
X170258000Y-51245333D01*
X170224667Y-51212000D01*
X170258000Y-51178667D01*
X170258000Y-51245333D01*
X169024668Y-51212000D02*
X169091334Y-51178667D01*
X169191334Y-51178667D01*
X169291334Y-51212000D01*
X169358001Y-51278667D01*
X169391334Y-51345333D01*
X169424668Y-51478667D01*
X169424668Y-51578667D01*
X169391334Y-51712000D01*
X169358001Y-51778667D01*
X169291334Y-51845333D01*
X169191334Y-51878667D01*
X169124668Y-51878667D01*
X169024668Y-51845333D01*
X168991334Y-51812000D01*
X168991334Y-51578667D01*
X169124668Y-51578667D01*
X168691334Y-51878667D02*
X168691334Y-51178667D01*
X168424668Y-51178667D01*
X168358001Y-51212000D01*
X168324668Y-51245333D01*
X168291334Y-51312000D01*
X168291334Y-51412000D01*
X168324668Y-51478667D01*
X168358001Y-51512000D01*
X168424668Y-51545333D01*
X168691334Y-51545333D01*
X167991334Y-51878667D02*
X167991334Y-51178667D01*
X167524668Y-51178667D02*
X167391335Y-51178667D01*
X167324668Y-51212000D01*
X167258001Y-51278667D01*
X167224668Y-51412000D01*
X167224668Y-51645333D01*
X167258001Y-51778667D01*
X167324668Y-51845333D01*
X167391335Y-51878667D01*
X167524668Y-51878667D01*
X167591335Y-51845333D01*
X167658001Y-51778667D01*
X167691335Y-51645333D01*
X167691335Y-51412000D01*
X167658001Y-51278667D01*
X167591335Y-51212000D01*
X167524668Y-51178667D01*
D11*
X186944000Y-45212000D02*
X136144000Y-45212000D01*
X138684000Y-50292000D02*
X186944000Y-50292000D01*
X186944000Y-45212000D02*
X186944000Y-50292000D01*
X136144000Y-45212000D02*
X136144000Y-47752000D01*
X137414000Y-50572000D02*
X135864000Y-50572000D01*
X136144000Y-47752000D02*
X138684000Y-47752000D01*
X138684000Y-47752000D02*
X138684000Y-50292000D01*
X135864000Y-50572000D02*
X135864000Y-49022000D01*
M02*

72
gerber/Breakout RasPi 3D-Drucker-Edge.Cuts.gbr

@ -0,0 +1,72 @@
G04 #@! TF.FileFunction,Profile,NP*
%FSLAX46Y46*%
G04 Gerber Fmt 4.6, Leading zero omitted, Abs format (unit mm)*
G04 Created by KiCad (PCBNEW 4.0.5) date 2017 April 15, Saturday 18:49:04*
%MOMM*%
%LPD*%
G01*
G04 APERTURE LIST*
%ADD10C,0.100000*%
G04 APERTURE END LIST*
D10*
X194032000Y-47188000D02*
G75*
G03X191032000Y-44188000I-3000000J0D01*
G01*
X132032000Y-44188000D02*
X191032000Y-44188000D01*
X132032000Y-44188000D02*
G75*
G03X129032000Y-47188000I0J-3000000D01*
G01*
X175032000Y-96188000D02*
G75*
G02X173032000Y-96188000I-1000000J0D01*
G01*
X175032000Y-81188000D02*
G75*
G03X173032000Y-81188000I-1000000J0D01*
G01*
X175032000Y-81188000D02*
X175032000Y-96188000D01*
X173032000Y-81188000D02*
X173032000Y-96188000D01*
X130032000Y-80688000D02*
G75*
G03X129032000Y-81688000I0J-1000000D01*
G01*
X133032000Y-80688000D02*
G75*
G03X134032000Y-79688000I0J1000000D01*
G01*
X134032000Y-64688000D02*
G75*
G03X133032000Y-63688000I-1000000J0D01*
G01*
X129032000Y-62688000D02*
G75*
G03X130032000Y-63688000I1000000J0D01*
G01*
X191032000Y-100188000D02*
G75*
G03X194032000Y-97188000I0J3000000D01*
G01*
X129032000Y-97188000D02*
G75*
G03X132032000Y-100188000I3000000J0D01*
G01*
X129032000Y-81688000D02*
X129032000Y-97188000D01*
X129032000Y-46688000D02*
X129032000Y-62688000D01*
X130032000Y-80688000D02*
X133032000Y-80688000D01*
X130032000Y-63688000D02*
X133032000Y-63688000D01*
X134032000Y-64688000D02*
X134032000Y-79688000D01*
X132032000Y-100188000D02*
X191032000Y-100188000D01*
X194032000Y-47196000D02*
X194032000Y-97696000D01*
M02*

4961
gerber/Breakout RasPi 3D-Drucker-F.Cu.gbr

File diff suppressed because it is too large

174
gerber/Breakout RasPi 3D-Drucker-F.Mask.gbr

@ -0,0 +1,174 @@
G04 #@! TF.FileFunction,Soldermask,Top*
%FSLAX46Y46*%
G04 Gerber Fmt 4.6, Leading zero omitted, Abs format (unit mm)*
G04 Created by KiCad (PCBNEW 4.0.5) date 2017 April 15, Saturday 18:49:04*
%MOMM*%
%LPD*%
G01*
G04 APERTURE LIST*
%ADD10C,0.100000*%
%ADD11C,6.200000*%
%ADD12R,1.727200X2.032000*%
%ADD13O,1.727200X2.032000*%
%ADD14C,1.727200*%
%ADD15O,1.727200X1.727200*%
%ADD16R,1.727200X1.727200*%
%ADD17O,0.899160X1.501140*%
%ADD18C,1.998980*%
%ADD19C,2.499360*%
%ADD20C,7.000240*%
%ADD21R,2.032000X2.032000*%
%ADD22O,2.032000X2.032000*%
%ADD23C,2.000000*%
%ADD24C,2.500000*%
%ADD25R,2.500000X2.500000*%
%ADD26R,2.000000X2.600000*%
%ADD27O,2.000000X2.600000*%
%ADD28C,1.501140*%
%ADD29C,2.999740*%
G04 APERTURE END LIST*
D10*
D11*
X132532000Y-47688000D03*
X190532000Y-47688000D03*
X190532000Y-96688000D03*
X132532000Y-96688000D03*
D12*
X165100000Y-63500000D03*
D13*
X162560000Y-63500000D03*
X160020000Y-63500000D03*
D14*
X137414000Y-49022000D03*
D15*
X137414000Y-46482000D03*
D14*
X139954000Y-49022000D03*
D15*
X139954000Y-46482000D03*
X142494000Y-49022000D03*
X142494000Y-46482000D03*
X145034000Y-49022000D03*
X145034000Y-46482000D03*
X147574000Y-49022000D03*
X147574000Y-46482000D03*
X150114000Y-49022000D03*
X150114000Y-46482000D03*
X152654000Y-49022000D03*
X152654000Y-46482000D03*
X155194000Y-49022000D03*
X155194000Y-46482000D03*
X157734000Y-49022000D03*
X157734000Y-46482000D03*
X160274000Y-49022000D03*
X160274000Y-46482000D03*
X162814000Y-49022000D03*
X162814000Y-46482000D03*
X165354000Y-49022000D03*
X165354000Y-46482000D03*
X167894000Y-49022000D03*
X167894000Y-46482000D03*
X170434000Y-49022000D03*
X170434000Y-46482000D03*
X172974000Y-49022000D03*
X172974000Y-46482000D03*
X175514000Y-49022000D03*
X175514000Y-46482000D03*
X178054000Y-49022000D03*
X178054000Y-46482000D03*
X180594000Y-49022000D03*
X180594000Y-46482000D03*
X183134000Y-49022000D03*
X183134000Y-46482000D03*
X185674000Y-49022000D03*
X185674000Y-46482000D03*
D16*
X143764000Y-57404000D03*
D15*
X143764000Y-54864000D03*
X146304000Y-57404000D03*
X146304000Y-54864000D03*
X148844000Y-57404000D03*
X148844000Y-54864000D03*
X151384000Y-57404000D03*
X151384000Y-54864000D03*
X153924000Y-57404000D03*
X153924000Y-54864000D03*
X156464000Y-57404000D03*
X156464000Y-54864000D03*
X159004000Y-57404000D03*
X159004000Y-54864000D03*
X161544000Y-57404000D03*
X161544000Y-54864000D03*
D17*
X142748000Y-64770000D03*
X141478000Y-64770000D03*
X144018000Y-64770000D03*
D18*
X169418000Y-54610000D03*
X169418000Y-62230000D03*
X147574000Y-64770000D03*
X155194000Y-64770000D03*
X172720000Y-54610000D03*
X172720000Y-62230000D03*
D19*
X177744120Y-59611260D03*
X190246000Y-54610000D03*
X190246000Y-64612520D03*
D20*
X182745380Y-59611260D03*
D21*
X165100000Y-67056000D03*
D22*
X162560000Y-67056000D03*
D23*
X140000000Y-88000000D03*
X135000000Y-88000000D03*
X150000000Y-88000000D03*
X145000000Y-88000000D03*
D24*
X138244000Y-77186000D03*
X142444000Y-77186000D03*
X146644000Y-77186000D03*
X150844000Y-77186000D03*
X155044000Y-77186000D03*
X159244000Y-77186000D03*
X163444000Y-77186000D03*
X167644000Y-77186000D03*
X171844000Y-77186000D03*
X176044000Y-77186000D03*
X180244000Y-77186000D03*
X184444000Y-77186000D03*
D25*
X138244000Y-71386000D03*
D24*
X142444000Y-71386000D03*
X146644000Y-71386000D03*
X150844000Y-71386000D03*
X155044000Y-71386000D03*
X159244000Y-71386000D03*
X163444000Y-71386000D03*
X167644000Y-71386000D03*
X171844000Y-71386000D03*
X176044000Y-71386000D03*
X180244000Y-71386000D03*
X184444000Y-71386000D03*
D26*
X177292000Y-86614000D03*
D27*
X179832000Y-86614000D03*
X182372000Y-86614000D03*
D26*
X186436000Y-86614000D03*
D27*
X188976000Y-86614000D03*
X191516000Y-86614000D03*
D28*
X166878860Y-87119880D03*
X164338860Y-87119880D03*
X162306860Y-87119880D03*
X159766860Y-87119880D03*
D29*
X169926860Y-89786880D03*
X156210860Y-89786880D03*
M02*

1938
gerber/Breakout RasPi 3D-Drucker-F.SilkS.gbr

File diff suppressed because it is too large

1251
gerber/Breakout RasPi 3D-Drucker-NPTH-drl_map.ps

File diff suppressed because it is too large

20
gerber/Breakout RasPi 3D-Drucker-NPTH.drl

@ -0,0 +1,20 @@
M48
;DRILL file {KiCad 4.0.5} date 2017 April 15, Saturday 18:49:06
;FORMAT={-:-/ absolute / inch / decimal}
FMAT,2
INCH,TZ
T1C0.108
T2C0.268
%
G90
G05
M72
T1
X5.2178Y-1.8775
X5.2178Y-3.8066
X7.5013Y-1.8775
X7.5013Y-3.8066
T2
X7.1947Y-2.3469
T0
M30

3925
gerber/Breakout RasPi 3D-Drucker-drl_map.ps

File diff suppressed because it is too large

140
gerber/Breakout RasPi 3D-Drucker.drl

@ -0,0 +1,140 @@
M48
;DRILL file {KiCad 4.0.5} date 2017 April 15, Saturday 18:49:06
;FORMAT={-:-/ absolute / inch / decimal}
FMAT,2
INCH,TZ
T1C0.024
T2C0.039
T3C0.039
T4C0.040
T5C0.047
T6C0.051
T7C0.059
T8C0.091
%
G90
G05
M72
T1
X5.57Y-2.55
X5.62Y-2.55
X5.67Y-2.55
T2
X5.315Y-3.4646
X5.5118Y-3.4646
X5.7087Y-3.4646
X5.9055Y-3.4646
T3
X5.81Y-2.55
X6.11Y-2.55
X6.29Y-3.4299
X6.39Y-3.4299
X6.47Y-3.4299
X6.57Y-3.4299
X6.67Y-2.15
X6.67Y-2.45
X6.8Y-2.15
X6.8Y-2.45
T4
X5.41Y-1.83
X5.41Y-1.93
X5.51Y-1.83
X5.51Y-1.93
X5.61Y-1.83
X5.61Y-1.93
X5.66Y-2.16
X5.66Y-2.26
X5.71Y-1.83
X5.71Y-1.93
X5.76Y-2.16
X5.76Y-2.26
X5.81Y-1.83
X5.81Y-1.93
X5.86Y-2.16
X5.86Y-2.26
X5.91Y-1.83
X5.91Y-1.93
X5.96Y-2.16
X5.96Y-2.26
X6.01Y-1.83
X6.01Y-1.93
X6.06Y-2.16
X6.06Y-2.26
X6.11Y-1.83
X6.11Y-1.93
X6.16Y-2.16
X6.16Y-2.26
X6.21Y-1.83
X6.21Y-1.93
X6.26Y-2.16
X6.26Y-2.26
X6.3Y-2.5
X6.31Y-1.83
X6.31Y-1.93
X6.36Y-2.16
X6.36Y-2.26
X6.4Y-2.5
X6.4Y-2.64
X6.41Y-1.83
X6.41Y-1.93
X6.5Y-2.5
X6.5Y-2.64
X6.51Y-1.83
X6.51Y-1.93
X6.61Y-1.83
X6.61Y-1.93
X6.71Y-1.83
X6.71Y-1.93
X6.81Y-1.83
X6.81Y-1.93
X6.91Y-1.83
X6.91Y-1.93
X7.01Y-1.83
X7.01Y-1.93
X7.11Y-1.83
X7.11Y-1.93
X7.21Y-1.83
X7.21Y-1.93
X7.31Y-1.83
X7.31Y-1.93
T5
X6.98Y-3.41
X7.08Y-3.41
X7.18Y-3.41
X7.34Y-3.41
X7.44Y-3.41
X7.54Y-3.41
T6
X6.9978Y-2.3469
X7.49Y-2.15
X7.49Y-2.5438
T7
X5.4427Y-2.8105
X5.4427Y-3.0388
X5.608Y-2.8105
X5.608Y-3.0388
X5.7734Y-2.8105
X5.7734Y-3.0388
X5.9387Y-2.8105
X5.9387Y-3.0388
X6.1041Y-2.8105
X6.1041Y-3.0388
X6.2694Y-2.8105
X6.2694Y-3.0388
X6.4348Y-2.8105
X6.4348Y-3.0388
X6.6002Y-2.8105
X6.6002Y-3.0388
X6.7655Y-2.8105
X6.7655Y-3.0388
X6.9309Y-2.8105
X6.9309Y-3.0388
X7.0962Y-2.8105
X7.0962Y-3.0388
X7.2616Y-2.8105
X7.2616Y-3.0388
T8
X6.15Y-3.5349
X6.69Y-3.5349
T0
M30

BIN
img/top.jpg

Binary file not shown.

After

Width:  |  Height:  |  Size: 346 KiB

77
kicad/Breakout RasPi 3D-Drucker

@ -0,0 +1,77 @@
*PADS-PCB*
*PART*
P3 Socket_Strips:Socket_Strip_Straight_2x20
P4 Pin_Headers:Pin_Header_Straight_2x08
RV1 Potentiometers:Potentiometer_Trimmer-Piher_PT15-V17-5_horizontal
R1 Resistors_THT:Resistor_Horizontal_RM15mm
P1 Connectors_Terminal_Blocks:TerminalBlock_WAGO-236_2Stift_RM5mm_2pol
P2 Connectors_Terminal_Blocks:TerminalBlock_WAGO-236_2Stift_RM5mm_2pol
R2 Resistors_THT:Resistor_Horizontal_RM15mm
Q1 TO_SOT_Packages_THT:TO-92_Inline_Narrow_Oval
R3 Resistors_THT:Resistor_Horizontal_RM15mm
R5 Resistors_THT:Resistor_Horizontal_RM15mm
*NET*
*SIGNAL* LCD_D4
P4.11
P3.21
*SIGNAL* LCD_D6
P4.13
P3.23
*SIGNAL* LCD_D5
P4.12
P3.22
*SIGNAL* LCD_D7
P4.14
P3.24
*SIGNAL* LCD_ENABLE
P3.16
P4.6
*SIGNAL* LCD_RS
P4.4
P3.15
*SIGNAL* Net-(P4-Pad15)
P4.15
R1.1
*SIGNAL* +3V3
P2.1
P3.11
R2.1
*SIGNAL* GND
P3.34
RV1.3
P3.25
P3.39
P4.1
P4.5
P3.6
P3.9
P3.20
P3.30
P4.16
P1.2
R2.2
Q1.3
*SIGNAL* Net-(Q1-Pad1)
Q1.1
R3.1
*SIGNAL* Net-(P3-Pad12)
P3.12
R3.2
*SIGNAL* PS_ON
Q1.2
P2.2
*SIGNAL* Net-(R5-Pad1)
RV1.1
R5.1
*SIGNAL* Net-(P4-Pad3)
RV1.2
P4.3
*SIGNAL* +5V
P3.2
R1.2
P3.4
R5.2
P1.1
P4.2
*END*

1358
kicad/Breakout RasPi 3D-Drucker old.kicad_pcb

File diff suppressed because it is too large

371
kicad/Breakout RasPi 3D-Drucker-cache.lib

@ -0,0 +1,371 @@
EESchema-LIBRARY Version 2.3
#encoding utf-8
#
# +12V
#
DEF +12V #PWR 0 0 Y Y 1 F P
F0 "#PWR" 0 -150 50 H I C CNN
F1 "+12V" 0 140 50 H V C CNN
F2 "" 0 0 50 H V C CNN
F3 "" 0 0 50 H V C CNN
DRAW
P 2 0 1 0 -30 50 0 100 N
P 2 0 1 0 0 0 0 100 N
P 2 0 1 0 0 100 30 50 N
X +12V 1 0 0 0 U 50 50 1 1 W N
ENDDRAW
ENDDEF
#
# +3V3
#
DEF +3V3 #PWR 0 0 Y Y 1 F P
F0 "#PWR" 0 -150 50 H I C CNN
F1 "+3V3" 0 140 50 H V C CNN
F2 "" 0 0 50 H V C CNN
F3 "" 0 0 50 H V C CNN
ALIAS +3.3V
DRAW
P 2 0 1 0 -30 50 0 100 N
P 2 0 1 0 0 0 0 100 N
P 2 0 1 0 0 100 30 50 N
X +3V3 1 0 0 0 U 50 50 1 1 W N
ENDDRAW
ENDDEF
#
# +5V
#
DEF +5V #PWR 0 0 Y Y 1 F P
F0 "#PWR" 0 -150 50 H I C CNN
F1 "+5V" 0 140 50 H V C CNN
F2 "" 0 0 50 H V C CNN
F3 "" 0 0 50 H V C CNN
DRAW
P 2 0 1 0 -30 50 0 100 N
P 2 0 1 0 0 0 0 100 N
P 2 0 1 0 0 100 30 50 N
X +5V 1 0 0 0 U 50 50 1 1 W N
ENDDRAW
ENDDEF
#
# ATX24
#
DEF ATX24 J 0 40 Y Y 1 F N
F0 "J" 0 -700 60 H V C CNN
F1 "ATX24" 0 700 60 H V C CNN
F2 "" 0 0 60 H V C CNN
F3 "" 0 0 60 H V C CNN
DRAW
X 3V3 1 -350 550 100 R 50 50 0 0 w
X 3V3 2 -350 450 100 R 50 50 0 0 w
X GND 3 -350 350 100 R 50 50 0 0 w
X 5V 4 -350 250 100 R 50 50 0 0 w
X GND 5 -350 150 100 R 50 50 0 0 w
X 5V 6 -350 50 100 R 50 50 0 0 w
X GND 7 -350 -50 100 R 50 50 0 0 w
X POK 8 -350 -150 100 R 50 50 0 0 w
X 5VSB 9 -350 -250 100 R 50 50 0 0 w
X 12V 10 -350 -350 100 R 50 50 0 0 w
X -5V 20 350 -150 100 L 50 50 0 0 w
X 12V 11 -350 -450 100 R 50 50 0 0 w
X 5V 21 350 -250 100 L 50 50 0 0 w
X 3V3 12 -350 -550 100 R 50 50 0 0 w
X 5V 22 350 -350 100 L 50 50 0 0 w
X 3V3 13 350 550 100 L 50 50 0 0 w
X 5V 23 350 -450 100 L 50 50 0 0 w
X -12 14 350 450 100 L 50 50 0 0 w
X GND 24 350 -550 100 L 50 50 0 0 w
X GND 15 350 350 100 L 50 50 0 0 w
X PS_ON 16 350 250 100 L 50 50 0 0 I
X GND 17 350 150 100 L 50 50 0 0 w
X GND 18 350 50 100 L 50 50 0 0 w
X GND 19 350 -50 100 L 50 50 0 0 w
S -250 -650 250 650 0 1 0 N
ENDDRAW
ENDDEF
#
# CONN_01X02
#
DEF CONN_01X02 P 0 40 Y N 1 F N
F0 "P" 0 150 50 H V C CNN
F1 "CONN_01X02" 100 0 50 V V C CNN
F2 "" 0 0 50 H V C CNN
F3 "" 0 0 50 H V C CNN
$FPLIST
Pin_Header_Straight_1X02
Pin_Header_Angled_1X02
Socket_Strip_Straight_1X02
Socket_Strip_Angled_1X02
$ENDFPLIST
DRAW
S -50 -45 10 -55 0 1 0 N
S -50 55 10 45 0 1 0 N
S -50 100 50 -100 0 1 0 N
X P1 1 -200 50 150 R 50 50 1 1 P
X P2 2 -200 -50 150 R 50 50 1 1 P
ENDDRAW
ENDDEF
#
# CONN_01X03
#
DEF CONN_01X03 P 0 40 Y N 1 F N
F0 "P" 0 200 50 H V C CNN
F1 "CONN_01X03" 100 0 50 V V C CNN
F2 "" 0 0 50 H V C CNN
F3 "" 0 0 50 H V C CNN
$FPLIST
Pin_Header_Straight_1X03
Pin_Header_Angled_1X03
Socket_Strip_Straight_1X03
Socket_Strip_Angled_1X03
$ENDFPLIST
DRAW
S -50 -95 10 -105 0 1 0 N
S -50 5 10 -5 0 1 0 N
S -50 105 10 95 0 1 0 N
S -50 150 50 -150 0 1 0 N
X P1 1 -200 100 150 R 50 50 1 1 P
X P2 2 -200 0 150 R 50 50 1 1 P
X P3 3 -200 -100 150 R 50 50 1 1 P
ENDDRAW
ENDDEF
#
# CONN_02X08
#
DEF CONN_02X08 P 0 1 Y N 1 F N
F0 "P" 0 450 50 H V C CNN
F1 "CONN_02X08" 0 0 50 V V C CNN
F2 "" 0 -1200 50 H V C CNN
F3 "" 0 -1200 50 H V C CNN
$FPLIST
Pin_Header_Straight_2X08
Pin_Header_Angled_2X08
Socket_Strip_Straight_2X08
Socket_Strip_Angled_2X08
$ENDFPLIST
DRAW
S -100 -345 -50 -355 0 1 0 N
S -100 -245 -50 -255 0 1 0 N
S -100 -145 -50 -155 0 1 0 N
S -100 -45 -50 -55 0 1 0 N
S -100 55 -50 45 0 1 0 N
S -100 155 -50 145 0 1 0 N
S -100 255 -50 245 0 1 0 N
S -100 355 -50 345 0 1 0 N
S -100 400 100 -400 0 1 0 N
S 50 -345 100 -355 0 1 0 N
S 50 -245 100 -255 0 1 0 N
S 50 -145 100 -155 0 1 0 N
S 50 -45 100 -55 0 1 0 N
S 50 55 100 45 0 1 0 N
S 50 155 100 145 0 1 0 N
S 50 255 100 245 0 1 0 N
S 50 355 100 345 0 1 0 N
X P1 1 -250 350 150 R 50 50 1 1 P
X P2 2 250 350 150 L 50 50 1 1 P
X P3 3 -250 250 150 R 50 50 1 1 P
X P4 4 250 250 150 L 50 50 1 1 P
X P5 5 -250 150 150 R 50 50 1 1 P
X P6 6 250 150 150 L 50 50 1 1 P
X P7 7 -250 50 150 R 50 50 1 1 P
X P8 8 250 50 150 L 50 50 1 1 P
X P9 9 -250 -50 150 R 50 50 1 1 P
X P10 10 250 -50 150 L 50 50 1 1 P
X P11 11 -250 -150 150 R 50 50 1 1 P
X P12 12 250 -150 150 L 50 50 1 1 P
X P13 13 -250 -250 150 R 50 50 1 1 P
X P14 14 250 -250 150 L 50 50 1 1 P
X P15 15 -250 -350 150 R 50 50 1 1 P
X P16 16 250 -350 150 L 50 50 1 1 P
ENDDRAW
ENDDEF
#
# CONN_02X20
#
DEF CONN_02X20 P 0 1 Y N 1 F N
F0 "P" 0 1050 50 H V C CNN
F1 "CONN_02X20" 0 0 50 V V C CNN
F2 "" 0 -950 50 H V C CNN
F3 "" 0 -950 50 H V C CNN
$FPLIST
Pin_Header_Straight_2X20
Pin_Header_Angled_2X20
Socket_Strip_Straight_2X20
Socket_Strip_Angled_2X20
$ENDFPLIST
DRAW
S -100 -945 -50 -955 0 1 0 N
S -100 -845 -50 -855 0 1 0 N
S -100 -745 -50 -755 0 1 0 N
S -100 -645 -50 -655 0 1 0 N
S -100 -545 -50 -555 0 1 0 N
S -100 -445 -50 -455 0 1 0 N
S -100 -345 -50 -355 0 1 0 N
S -100 -245 -50 -255 0 1 0 N
S -100 -145 -50 -155 0 1 0 N
S -100 -45 -50 -55 0 1 0 N
S -100 55 -50 45 0 1 0 N
S -100 155 -50 145 0 1 0 N
S -100 255 -50 245 0 1 0 N
S -100 355 -50 345 0 1 0 N
S -100 455 -50 445 0 1 0 N
S -100 555 -50 545 0 1 0 N
S -100 655 -50 645 0 1 0 N
S -100 755 -50 745 0 1 0 N
S -100 855 -50 845 0 1 0 N
S -100 955 -50 945 0 1 0 N
S -100 1000 100 -1000 0 1 0 N
S 50 -945 100 -955 0 1 0 N
S 50 -845 100 -855 0 1 0 N
S 50 -745 100 -755 0 1 0 N
S 50 -645 100 -655 0 1 0 N
S 50 -545 100 -555 0 1 0 N
S 50 -445 100 -455 0 1 0 N
S 50 -345 100 -355 0 1 0 N
S 50 -245 100 -255 0 1 0 N
S 50 -145 100 -155 0 1 0 N
S 50 -45 100 -55 0 1 0 N
S 50 55 100 45 0 1 0 N
S 50 155 100 145 0 1 0 N
S 50 255 100 245 0 1 0 N
S 50 355 100 345 0 1 0 N
S 50 455 100 445 0 1 0 N
S 50 555 100 545 0 1 0 N
S 50 655 100 645 0 1 0 N
S 50 755 100 745 0 1 0 N
S 50 855 100 845 0 1 0 N
S 50 955 100 945 0 1 0 N
X P1 1 -250 950 150 R 50 50 1 1 P
X P2 2 250 950 150 L 50 50 1 1 P
X P3 3 -250 850 150 R 50 50 1 1 P
X P4 4 250 850 150 L 50 50 1 1 P
X P5 5 -250 750 150 R 50 50 1 1 P
X P6 6 250 750 150 L 50 50 1 1 P
X P7 7 -250 650 150 R 50 50 1 1 P
X P8 8 250 650 150 L 50 50 1 1 P
X P9 9 -250 550 150 R 50 50 1 1 P
X P10 10 250 550 150 L 50 50 1 1 P
X P20 20 250 50 150 L 50 50 1 1 P
X P30 30 250 -450 150 L 50 50 1 1 P
X P40 40 250 -950 150 L 50 50 1 1 P
X P11 11 -250 450 150 R 50 50 1 1 P
X P21 21 -250 -50 150 R 50 50 1 1 P
X P31 31 -250 -550 150 R 50 50 1 1 P
X P12 12 250 450 150 L 50 50 1 1 P
X P22 22 250 -50 150 L 50 50 1 1 P
X P32 32 250 -550 150 L 50 50 1 1 P
X P13 13 -250 350 150 R 50 50 1 1 P
X P23 23 -250 -150 150 R 50 50 1 1 P
X P33 33 -250 -650 150 R 50 50 1 1 P
X P14 14 250 350 150 L 50 50 1 1 P
X P24 24 250 -150 150 L 50 50 1 1 P
X P34 34 250 -650 150 L 50 50 1 1 P
X P15 15 -250 250 150 R 50 50 1 1 P
X P25 25 -250 -250 150 R 50 50 1 1 P
X P35 35 -250 -750 150 R 50 50 1 1 P
X P16 16 250 250 150 L 50 50 1 1 P
X P26 26 250 -250 150 L 50 50 1 1 P
X P36 36 250 -750 150 L 50 50 1 1 P
X P17 17 -250 150 150 R 50 50 1 1 P
X P27 27 -250 -350 150 R 50 50 1 1 P
X P37 37 -250 -850 150 R 50 50 1 1 P
X P18 18 250 150 150 L 50 50 1 1 P
X P28 28 250 -350 150 L 50 50 1 1 P
X P38 38 250 -850 150 L 50 50 1 1 P
X P19 19 -250 50 150 R 50 50 1 1 P
X P29 29 -250 -450 150 R 50 50 1 1 P
X P39 39 -250 -950 150 R 50 50 1 1 P
ENDDRAW
ENDDEF
#
# GND
#
DEF GND #PWR 0 0 Y Y 1 F P
F0 "#PWR" 0 -250 50 H I C CNN
F1 "GND" 0 -150 50 H V C CNN
F2 "" 0 0 50 H V C CNN
F3 "" 0 0 50 H V C CNN
DRAW
P 6 0 1 0 0 0 0 -50 50 -50 0 -100 -50 -50 0 -50 N
X GND 1 0 0 0 D 50 50 1 1 W N
ENDDRAW
ENDDEF
#
# POT_TRIM
#
DEF POT_TRIM RV 0 40 N N 1 F N
F0 "RV" -175 0 50 V V C CNN
F1 "POT_TRIM" -100 0 50 V V C CNN
F2 "" 0 0 50 H V C CNN
F3 "" 0 0 50 H V C CNN
DRAW
S 40 100 -40 -100 0 1 10 N
P 2 0 1 0 60 30 60 -30 N
P 2 0 1 0 100 0 60 0 N
X 1 1 0 150 50 D 50 50 1 1 P
X 2 2 150 0 50 L 50 50 1 1 P
X 3 3 0 -150 50 U 50 50 1 1 P
ENDDRAW
ENDDEF
#
# Q_NPN_BCE
#
DEF Q_NPN_BCE Q 0 0 Y N 1 F N
F0 "Q" 200 50 50 H V L CNN
F1 "Q_NPN_BCE" 200 -50 50 H V L CNN
F2 "" 200 100 50 H V C CNN
F3 "" 0 0 50 H V C CNN
DRAW
C 50 0 111 0 1 10 N
P 2 0 1 0 25 25 100 100 N
P 3 0 1 0 25 -25 100 -100 100 -100 N
P 3 0 1 20 25 75 25 -75 25 -75 N
P 5 0 1 0 50 -70 70 -50 90 -90 50 -70 50 -70 F
X B 1 -200 0 225 R 50 50 1 1 I
X C 2 100 200 100 D 50 50 1 1 P
X E 3 100 -200 100 U 50 50 1 1 P
ENDDRAW
ENDDEF
#
# R
#
DEF R R 0 0 N Y 1 F N
F0 "R" 80 0 50 V V C CNN
F1 "R" 0 0 50 V V C CNN
F2 "" -70 0 50 V V C CNN
F3 "" 0 0 50 H V C CNN
$FPLIST
R_*
Resistor_*
$ENDFPLIST
DRAW
S -40 -100 40 100 0 1 10 N
X ~ 1 0 150 50 D 50 50 1 1 P
X ~ 2 0 -150 50 U 50 50 1 1 P
ENDDRAW
ENDDEF
#
# USB_A
#
DEF USB_A P 0 40 Y Y 1 F N
F0 "P" 200 -200 50 H V C CNN
F1 "USB_A" -50 200 50 H V C CNN
F2 "" -50 -100 50 V V C CNN
F3 "" -50 -100 50 V V C CNN
$FPLIST
USB*
$ENDFPLIST
DRAW
S -250 -150 150 150 0 1 0 N
S -205 -150 -195 -120 0 1 0 N
S -105 -150 -95 -120 0 1 0 N
S -5 -150 5 -120 0 1 0 N
S 95 -150 105 -120 0 1 0 N
X VBUS 1 -200 -300 150 U 50 50 1 1 W
X D- 2 -100 -300 150 U 50 50 1 1 P
X D+ 3 0 -300 150 U 50 50 1 1 P
X GND 4 100 -300 150 U 50 50 1 1 W
X shield 5 300 100 150 L 50 50 1 1 P
ENDDRAW
ENDDEF
#
#End Library

738
kicad/Breakout RasPi 3D-Drucker.bak

@ -0,0 +1,738 @@
EESchema Schematic File Version 2
LIBS:power
LIBS:device
LIBS:transistors
LIBS:conn
LIBS:linear
LIBS:regul
LIBS:74xx
LIBS:cmos4000
LIBS:adc-dac
LIBS:memory
LIBS:xilinx
LIBS:microcontrollers
LIBS:dsp
LIBS:microchip
LIBS:analog_switches
LIBS:motorola
LIBS:texas
LIBS:intel
LIBS:audio
LIBS:interface
LIBS:digital-audio
LIBS:philips
LIBS:display
LIBS:cypress
LIBS:siliconi
LIBS:opto
LIBS:atmel
LIBS:contrib
LIBS:valves
LIBS:atx24
LIBS:Breakout RasPi 3D-Drucker-cache
EELAYER 25 0
EELAYER END
$Descr A4 11693 8268
encoding utf-8
Sheet 1 1
Title ""
Date ""
Rev ""
Comp ""
Comment1 ""
Comment2 ""
Comment3 ""
Comment4 ""
$EndDescr
$Comp
L CONN_02X20 P2
U 1 1 58A9C76E
P 4850 2250
F 0 "P2" H 4850 3300 50 0000 C CNN
F 1 "Raspberry Pi GPIO" V 4850 2250 50 0000 C CNN
F 2 "Socket_Strips:Socket_Strip_Straight_2x20" H 4850 1300 50 0001 C CNN
F 3 "" H 4850 1300 50 0000 C CNN
1 4850 2250
1 0 0 -1
$EndComp
$Comp
L CONN_02X08 P3
U 1 1 58A9C814
P 4850 3950
F 0 "P3" H 4850 4400 50 0000 C CNN
F 1 "HD44780 LCD" V 4850 3950 50 0000 C CNN
F 2 "Connectors:IDC_Header_Straight_16pins" H 4850 2750 50 0001 C CNN
F 3 "" H 4850 2750 50 0000 C CNN
1 4850 3950
1 0 0 -1
$EndComp
$Comp
L POT_TRIM RV1
U 1 1 58A9C906
P 3900 3700
F 0 "RV1" V 3725 3700 50 0000 C CNN
F 1 "10k" V 3800 3700 50 0000 C CNN
F 2 "Potentiometers:Potentiometer_Trimmer-Piher_PT15-V12-5_horizontal_revers" H 3900 3700 50 0001 C CNN
F 3 "" H 3900 3700 50 0000 C CNN
1 3900 3700
1 0 0 -1
$EndComp
$Comp
L R R1
U 1 1 58A9CA1C
P 4150 4350
F 0 "R1" V 4230 4350 50 0000 C CNN
F 1 "22" V 4150 4350 50 0000 C CNN
F 2 "Resistors_THT:Resistor_Horizontal_RM7mm" V 4080 4350 50 0001 C CNN
F 3 "" H 4150 4350 50 0000 C CNN
1 4150 4350
0 1 1 0
$EndComp
$Comp
L GND #PWR01
U 1 1 58A9CDA2
P 5400 1500
F 0 "#PWR01" H 5400 1250 50 0001 C CNN
F 1 "GND" H 5400 1350 50 0000 C CNN
F 2 "" H 5400 1500 50 0000 C CNN
F 3 "" H 5400 1500 50 0000 C CNN
1 5400 1500
1 0 0 -1
$EndComp
$Comp
L GND #PWR02
U 1 1 58A9CDC6
P 4300 3500
F 0 "#PWR02" H 4300 3250 50 0001 C CNN
F 1 "GND" H 4300 3350 50 0000 C CNN
F 2 "" H 4300 3500 50 0000 C CNN
F 3 "" H 4300 3500 50 0000 C CNN
1 4300 3500
1 0 0 -1
$EndComp
$Comp
L GND #PWR03
U 1 1 58A9CE66
P 5400 4300
F 0 "#PWR03" H 5400 4050 50 0001 C CNN
F 1 "GND" H 5400 4150 50 0000 C CNN
F 2 "" H 5400 4300 50 0000 C CNN
F 3 "" H 5400 4300 50 0000 C CNN
1 5400 4300
1 0 0 -1
$EndComp
$Comp
L GND #PWR04
U 1 1 58A9D8E4
P 3900 3850
F 0 "#PWR04" H 3900 3600 50 0001 C CNN
F 1 "GND" H 3900 3700 50 0000 C CNN
F 2 "" H 3900 3850 50 0000 C CNN
F 3 "" H 3900 3850 50 0000 C CNN
1 3900 3850
1 0 0 -1
$EndComp
Text GLabel 5250 3700 2 60 Input ~ 0
LCD_RS
Text GLabel 5250 3850 2 60 Input ~ 0
LCD_ENABLE
Text GLabel 5250 4050 2 60 Input ~ 0
LCD_D5
Text GLabel 5250 4200 2 60 Input ~ 0
LCD_D7
Text GLabel 4450 4050 0 60 Input ~ 0
LCD_D4
Text GLabel 4450 4200 0 60 Input ~ 0
LCD_D6
Text GLabel 4450 2250 0 60 Output ~ 0
LCD_D4
Text GLabel 4450 2400 0 60 Output ~ 0
LCD_D6
Text GLabel 5250 2250 2 60 Output ~ 0
LCD_D5
Text GLabel 5250 2400 2 60 Output ~ 0
LCD_D7
Text GLabel 5250 2000 2 60 Output ~ 0
LCD_ENABLE
Text GLabel 4450 2000 0 60 Output ~ 0
LCD_RS
$Comp
L GND #PWR05
U 1 1 58A9E00A
P 3750 1800
F 0 "#PWR05" H 3750 1550 50 0001 C CNN
F 1 "GND" H 3750 1650 50 0000 C CNN
F 2 "" H 3750 1800 50 0000 C CNN
F 3 "" H 3750 1800 50 0000 C CNN
1 3750 1800
1 0 0 -1
$EndComp
$Comp
L Q_NPN_BCE Q1
U 1 1 58A9E36B
P 7500 1950
F 0 "Q1" H 7700 2000 50 0000 L CNN
F 1 "Q_NPN_BCE" H 7700 1900 50 0000 L CNN
F 2 "TO_SOT_Packages_THT:TO-92_Inline_Narrow_Oval" H 7700 2050 50 0001 C CNN
F 3 "" H 7500 1950 50 0000 C CNN
1 7500 1950
1 0 0 -1
$EndComp
$Comp
L R R3
U 1 1 58A9E3A9
P 7050 1950
F 0 "R3" V 7130 1950 50 0000 C CNN
F 1 "1k" V 7050 1950 50 0000 C CNN
F 2 "Resistors_THT:Resistor_Horizontal_RM7mm" V 6980 1950 50 0001 C CNN
F 3 "" H 7050 1950 50 0000 C CNN
1 7050 1950
0 1 1 0
$EndComp
Text GLabel 7750 1600 2 60 Output ~ 0
PS_ON
$Comp
L R R5
U 1 1 58A9F0FE
P 3750 3450
F 0 "R5" V 3830 3450 50 0000 C CNN
F 1 "10k" V 3750 3450 50 0000 C CNN
F 2 "Resistors_THT:Resistor_Horizontal_RM7mm" V 3680 3450 50 0001 C CNN
F 3 "" H 3750 3450 50 0000 C CNN
1 3750 3450
0 1 1 0
$EndComp
$Comp
L GND #PWR06
U 1 1 58AA072C
P 5800 2150
F 0 "#PWR06" H 5800 1900 50 0001 C CNN
F 1 "GND" H 5800 2000 50 0000 C CNN
F 2 "" H 5800 2150 50 0000 C CNN
F 3 "" H 5800 2150 50 0000 C CNN
1 5800 2150
1 0 0 -1
$EndComp
$Comp
L GND #PWR07
U 1 1 58AA0876
P 4250 3200
F 0 "#PWR07" H 4250 2950 50 0001 C CNN
F 1 "GND" H 4250 3050 50 0000 C CNN
F 2 "" H 4250 3200 50 0000 C CNN
F 3 "" H 4250 3200 50 0000 C CNN
1 4250 3200
1 0 0 -1
$EndComp
$Comp
L GND #PWR08
U 1 1 58AA0EEA
P 5400 2900
F 0 "#PWR08" H 5400 2650 50 0001 C CNN
F 1 "GND" H 5400 2750 50 0000 C CNN
F 2 "" H 5400 2900 50 0000 C CNN
F 3 "" H 5400 2900 50 0000 C CNN
1 5400 2900
1 0 0 -1
$EndComp
$Comp
L +3V3 #PWR09
U 1 1 58BDD3CF
P 1600 3100
F 0 "#PWR09" H 1600 2950 50 0001 C CNN
F 1 "+3V3" H 1600 3240 50 0000 C CNN
F 2 "" H 1600 3100 50 0000 C CNN
F 3 "" H 1600 3100 50 0000 C CNN
1 1600 3100
1 0 0 -1
$EndComp
$Comp
L GND #PWR010
U 1 1 58BDD451
P 1600 3350
F 0 "#PWR010" H 1600 3100 50 0001 C CNN
F 1 "GND" H 1600 3200 50 0000 C CNN
F 2 "" H 1600 3350 50 0000 C CNN
F 3 "" H 1600 3350 50 0000 C CNN
1 1600 3350
1 0 0 -1
$EndComp
Text GLabel 3000 3450 2 60 Input ~ 0
PS_ON
$Comp
L GND #PWR011
U 1 1 58BDD7E1
P 2850 4250
F 0 "#PWR011" H 2850 4000 50 0001 C CNN
F 1 "GND" H 2850 4100 50 0000 C CNN
F 2 "" H 2850 4250 50 0000 C CNN
F 3 "" H 2850 4250 50 0000 C CNN
1 2850 4250
1 0 0 -1
$EndComp
$Comp
L GND #PWR012
U 1 1 58BDE422
P 7600 2300
F 0 "#PWR012" H 7600 2050 50 0001 C CNN
F 1 "GND" H 7600 2150 50 0000 C CNN
F 2 "" H 7600 2300 50 0000 C CNN
F 3 "" H 7600 2300 50 0000 C CNN
1 7600 2300
1 0 0 -1
$EndComp
$Comp
L CONN_01X03 J1
U 1 1 58BDE4DC
P 6900 1400
F 0 "J1" H 6900 1600 50 0000 C CNN
F 1 "PSU_ON" V 7000 1400 50 0000 C CNN
F 2 "Pin_Headers:Pin_Header_Straight_1x03" V 6900 1400 50 0001 C CNN
F 3 "" H 6900 1400 50 0000 C CNN
1 6900 1400
0 1 -1 0
$EndComp
$Comp
L CONN_01X02 J2
U 1 1 58BDE56A
P 7650 1050
F 0 "J2" H 7650 1200 50 0000 C CNN
F 1 "Always on" V 7750 1050 50 0000 C CNN
F 2 "Pin_Headers:Pin_Header_Straight_1x02" H 7650 1050 50 0001 C CNN
F 3 "" H 7650 1050 50 0000 C CNN
1 7650 1050
0 -1 -1 0
$EndComp
$Comp
L GND #PWR013
U 1 1 58BDE66A
P 7900 1250
F 0 "#PWR013" H 7900 1000 50 0001 C CNN
F 1 "GND" H 7900 1100 50 0000 C CNN
F 2 "" H 7900 1250 50 0000 C CNN
F 3 "" H 7900 1250 50 0000 C CNN
1 7900 1250
1 0 0 -1
$EndComp
$Comp
L ATX24 P1
U 1 1 58BDDC33
P 2300 3700
F 0 "P1" H 2300 3000 60 0000 C CNN
F 1 "ATX24" H 2300 4400 60 0000 C CNN
F 2 "Connectors:ATX24" H 2300 3700 60 0001 C CNN
F 3 "" H 2300 3700 60 0000 C CNN
1 2300 3700
1 0 0 -1
$EndComp
$Comp
L +12V #PWR014
U 1 1 58F20531
P 1450 4150
F 0 "#PWR014" H 1450 4000 50 0001 C CNN
F 1 "+12V" H 1450 4290 50 0000 C CNN
F 2 "" H 1450 4150 50 0000 C CNN
F 3 "" H 1450 4150 50 0000 C CNN
1 1450 4150
0 -1 -1 0
$EndComp
Text GLabel 5550 1300 2 60 Input ~ 0
5VSB
Text GLabel 5700 3550 2 60 Input ~ 0
5VSB
Text GLabel 3900 4350 0 60 Input ~ 0
5VSB
Text GLabel 1600 3950 0 60 Output ~ 0
5VSB
$Comp
L +5V #PWR015
U 1 1 58F2065F
P 2750 3950
F 0 "#PWR015" H 2750 3800 50 0001 C CNN
F 1 "+5V" H 2750 4090 50 0000 C CNN
F 2 "" H 2750 3950 50 0000 C CNN
F 3 "" H 2750 3950 50 0000 C CNN
1 2750 3950
1 0 0 -1
$EndComp
$Comp
L GND #PWR016
U 1 1 58F20D06
P 2050 1050
F 0 "#PWR016" H 2050 800 50 0001 C CNN
F 1 "GND" H 2050 900 50 0000 C CNN
F 2 "" H 2050 1050 50 0000 C CNN
F 3 "" H 2050 1050 50 0000 C CNN
1 2050 1050
0 -1 -1 0
$EndComp
$Comp
L +12V #PWR017
U 1 1 58F20D3E
P 2200 1150
F 0 "#PWR017" H 2200 1000 50 0001 C CNN
F 1 "+12V" H 2200 1290 50 0000 C CNN
F 2 "" H 2200 1150 50 0000 C CNN
F 3 "" H 2200 1150 50 0000 C CNN
1 2200 1150
0 1 1 0
$EndComp
$Comp
L +5V #PWR018
U 1 1 58F20D76
P 2350 1650
F 0 "#PWR018" H 2350 1500 50 0001 C CNN
F 1 "+5V" H 2350 1790 50 0000 C CNN
F 2 "" H 2350 1650 50 0000 C CNN
F 3 "" H 2350 1650 50 0000 C CNN
1 2350 1650
0 1 1 0
$EndComp
$Comp
L CONN_01X02 P4
U 1 1 58F2170C
P 1650 1100
F 0 "P4" H 1650 1250 50 0000 C CNN
F 1 "CONN_01X02" V 1750 1100 50 0000 C CNN
F 2 "Connectors:RND_205-00001" H 1650 1100 50 0001 C CNN
F 3 "" H 1650 1100 50 0000 C CNN
1 1650 1100
-1 0 0 -1
$EndComp
$Comp
L CONN_01X02 P5
U 1 1 58F21766
P 1650 1700
F 0 "P5" H 1650 1850 50 0000 C CNN
F 1 "CONN_01X02" V 1750 1700 50 0000 C CNN
F 2 "Connectors:RND_205-00001" H 1650 1700 50 0001 C CNN
F 3 "" H 1650 1700 50 0000 C CNN
1 1650 1700
-1 0 0 1
$EndComp
$Comp
L +3V3 #PWR019
U 1 1 58A9DFE4
P 4300 1800
F 0 "#PWR019" H 4300 1650 50 0001 C CNN
F 1 "+3V3" H 4300 1940 50 0000 C CNN
F 2 "" H 4300 1800 50 0000 C CNN
F 3 "" H 4300 1800 50 0000 C CNN
1 4300 1800
1 0 0 -1
$EndComp
Wire Wire Line
5100 1500 5400 1500
Wire Wire Line
5400 4300 5100 4300
Wire Wire Line
4600 3700 4050 3700
Wire Wire Line
4550 3800 4600 3800
Wire Wire Line
4550 3500 4550 3800
Wire Wire Line
4550 3500 4300 3500
Wire Wire Line
4600 3600 4550 3600
Connection ~ 4550 3600
Wire Wire Line
5100 3600 5400 3600
Wire Wire Line
5250 3700 5100 3700
Wire Wire Line
5100 3800 5200 3800
Wire Wire Line
5200 3800 5200 3850
Wire Wire Line
5200 3850 5250 3850
Wire Wire Line
5250 4050 5200 4050
Wire Wire Line
5200 4050 5200 4100
Wire Wire Line
5200 4100 5100 4100
Wire Wire Line
5100 4200 5250 4200
Wire Wire Line
4600 4200 4450 4200
Wire Wire Line
4600 4100 4500 4100
Wire Wire Line
4500 4100 4500 4050
Wire Wire Line
4500 4050 4450 4050
Wire Wire Line
5250 2400 5100 2400
Wire Wire Line
4600 2400 4450 2400
Wire Wire Line
4450 2250 4500 2250
Wire Wire Line
4500 2250 4500 2300
Wire Wire Line
4500 2300 4600 2300
Wire Wire Line
5250 2250 5200 2250
Wire Wire Line
5200 2250 5200 2300
Wire Wire Line
5200 2300 5100 2300
Wire Wire Line
5250 2000 5100 2000
Wire Wire Line
4600 2000 4450 2000
Wire Wire Line
4600 4300 4500 4300
Wire Wire Line
4500 4300 4500 4350
Wire Wire Line
4500 4350 4300 4350
Wire Wire Line
3900 4350 4000 4350
Wire Wire Line
3900 3550 3900 3450
Wire Wire Line
3600 3450 3500 3450
Wire Wire Line
4250 2500 4600 2500
Wire Wire Line
5800 2150 5150 2150
Wire Wire Line
5150 2150 5150 2200
Wire Wire Line
5150 2200 5100 2200
Wire Wire Line
4600 3200 4250 3200
Wire Wire Line
5100 1400 5400 1400
Wire Wire Line
5400 1400 5400 1300
Wire Wire Line
4600 1700 4450 1700
Wire Wire Line
4450 1700 4450 1600
Wire Wire Line
4450 1600 3750 1600
Wire Wire Line
3750 1600 3750 1800
Connection ~ 5400 1300
Wire Wire Line
5100 2900 5400 2900
Wire Wire Line
5100 2700 5400 2700
Wire Wire Line
5400 2700 5400 2900
Wire Wire Line
4250 3200 4250 2500
Wire Wire Line
5100 1300 5550 1300
Wire Wire Line
7300 1950 7200 1950
Wire Wire Line
6900 1950 6800 1950
Wire Wire Line
6800 1950 6800 1600
Wire Wire Line
7000 1600 7750 1600
Wire Wire Line
7600 1250 7600 1750
Connection ~ 7600 1600
Wire Wire Line
5100 1800 6900 1800
Wire Wire Line
6900 1800 6900 1600
Wire Wire Line
7600 2300 7600 2150
Wire Wire Line
7700 1250 7900 1250
Wire Wire Line
2650 3350 2850 3350
Wire Wire Line
2850 3350 2850 4250
Wire Wire Line
2650 3550 2850 3550
Connection ~ 2850 3550
Wire Wire Line
2650 3650 2850 3650
Connection ~ 2850 3650
Wire Wire Line
2650 3750 2850 3750
Connection ~ 2850 3750
Wire Wire Line
2850 4250 2650 4250
Connection ~ 2850 4250
Wire Wire Line
2650 3450 3000 3450
Wire Wire Line
1600 3350 1950 3350
Wire Wire Line
1950 3550 1850 3550
Wire Wire Line
1850 3350 1850 3750
Connection ~ 1850 3350
Wire Wire Line
1850 3750 1950 3750
Connection ~ 1850 3550
Wire Wire Line
1950 3950 1600 3950
Wire Wire Line
1850 3250 1950 3250
Wire Wire Line
1850 2950 1850 3250
Wire Wire Line
1600 3150 1950 3150
Wire Wire Line
1600 3150 1600 3100
Connection ~ 1850 3150
Wire Wire Line
2650 3150 2650 2950
Wire Wire Line
2650 2950 1850 2950
Wire Wire Line
2650 3950 2750 3950
Wire Wire Line
2750 3950 2750 4150
Wire Wire Line
2750 4050 2650 4050
Wire Wire Line
2750 4150 2650 4150
Connection ~ 2750 4050
Wire Wire Line
1450 4150 1950 4150
Wire Wire Line
1950 4050 1850 4050
Wire Wire Line
1850 4050 1850 4150
Connection ~ 1850 4150
Wire Wire Line
5400 3600 5400 3550
Wire Wire Line
5400 3550 5700 3550
Wire Wire Line
3500 3450 3500 4150
Wire Wire Line
3500 4150 3950 4150
Wire Wire Line
3950 4150 3950 4350
Connection ~ 3950 4350
Wire Wire Line
1850 1050 2050 1050
Wire Wire Line
1850 1150 2200 1150
Wire Wire Line
1850 1650 2350 1650
Wire Wire Line
1850 1750 2500 1750
Wire Wire Line
4600 1800 4300 1800
Text GLabel 2500 1750 2 60 Input ~ 0
5VSB
$Comp
L CONN_01X03 P7
U 1 1 58F229F7
P 6950 4150
F 0 "P7" H 6950 4350 50 0000 C CNN
F 1 "FAN5" V 7050 4150 50 0000 C CNN
F 2 "Connectors_Molex:Molex_KK-6410-03_03x2.54mm_Straight" H 6950 4150 50 0001 C CNN
F 3 "" H 6950 4150 50 0000 C CNN
1 6950 4150
-1 0 0 1
$EndComp
$Comp
L CONN_01X03 P6
U 1 1 58F22A71
P 6950 3450
F 0 "P6" H 6950 3650 50 0000 C CNN
F 1 "FAN12" V 7050 3450 50 0000 C CNN
F 2 "Connectors_Molex:Molex_KK-6410-03_03x2.54mm_Straight" H 6950 3450 50 0001 C CNN
F 3 "" H 6950 3450 50 0000 C CNN
1 6950 3450
-1 0 0 1
$EndComp
$Comp
L USB_A P8
U 1 1 58F22BA9
P 6900 5000
F 0 "P8" H 7100 4800 50 0000 C CNN
F 1 "USB_A" H 6850 5200 50 0000 C CNN
F 2 "Connectors:USB_A" V 6850 4900 50