viri-leds-dmx-sacn/config.example.toml

59 lines
1.6 KiB
TOML

# C3VOC viri MQTT to sACN DMX
# All options are optional, except for mqtt host. The options below
# reflect the default values if missing.
# This section contains the login information to your mqtt server.
# user and password are ignored if both are missing or empty.
[mqtt]
host = ""
user = ""
password = ""
topic = "/voc/alert"
[sacn]
# Wether to enable sACN multicast. Default is off.
multicast = false
# If sACN multicast is disabled, this specifies the address sACN unicast
# is sent to.
target = "127.0.0.1"
# which universe to address
universe = 1
[alerts]
# This specifies the maximum DMX dimmer value that's sent to your lights
# when alerts occur. This must be atleast the same or more as the
# rainbow brightness (see below).
brightness = 255
[rainbow]
# Wether to enable the rainbow 'no alerts' loop. If false, all other
# options in here will be ignored.
enable = true
# This directly controls the 'value' part of the HSV equation in the
# rainbow 'no alerts' break loop. Value must be between 10% and 100%.
intensity = 100
# DMX dimmer value when displaying the rainbow pattern. Must be equal
# or below the generic 'brightness' value above.
brightness = 150
# Speed of the rainbow pattern. This is specified as "miliseconds
# between rotating the hue wheel by 1 degree". Minimum value is 25,
# because sACN does not support more than 40 fps. Setting it any lower
# will disable the animation altogehter, resulting in static lights.
speed = 25
# This contains the DMX start addresses of your light fixtures. You
# have to add atleast one fixture for the software to work.
[lights]
ignition_wal_l710 = []
varytec_hero_wash_712_zoom = []
wled_multi_rgb = []